5.0 
What tankless water heater work typically costs in Aubrey and Denton County
A tankless heater heats water as it flows instead of storing it, so there is no tank to wear out and no standby loss. The tradeoff is the up-front price. The unit costs more, and the install often changes the venting, the gas line, or the electrical service. The ranges below are what we expect for North Texas homes in 2026. The number you pay is set on site, after we see the location.
| Job | Typical range | What moves the price |
|---|---|---|
| Tankless repair or diagnosis (error code, sensor, igniter, flow valve) | $150 to $700 | The part, and how much of the unit has to come apart |
| Tankless flush and descale | $150 to $350 | Your water, and whether isolation valves are already installed |
| Tankless water heater install or replacement | $4,000 to $7,500 installed | Unit size, venting, gas line size or electrical, and whether you are converting from a tank |
| Gas line upsizing for a tankless unit | $300 to $1,500 | Length of the run and the pipe size needed |
| Isolation (service) valves for flushing | $150 to $400 | Whether the unit already has them |
These ranges are for planning. The price you approve is the written estimate we give you at your home, before any work starts.
How the $79 dispatch fee works
A $79 dispatch fee covers sending a licensed plumber to your home to find the problem and give you an estimate. When you approve the recommended work, the $79 is applied toward your repair total. On a tankless job, that visit is where we look at the gas supply, the venting path, the water connections, and the electrical service, because those decide most of the price. Nothing starts until you have seen the price and said yes.
Tankless or tank: how the cost compares
A standard tank replacement usually costs less to install. You can see those figures on our tank water heater cost page. A tankless unit can make sense when you want endless hot water for a larger household, when floor space in the garage or closet is tight, or when your tank heater is failing and you plan to stay in the home a long time. It makes less sense when a home has no practical way to run the venting, or when the gas line or panel work would add more than you want to spend. We will tell you if a tank is the better fit for your house.
What pushes a tankless price up or down
- Gas or electric. A gas tankless heater draws far more gas than a tank unit, so many homes need a larger gas line. An electric unit needs heavy-gauge wiring and spare capacity in the panel.
- Venting. Condensing models like the Navien units we install vent through plastic pipe and need a drain for the condensate. A longer vent run or a new wall or roof penetration adds labor.
- Capacity. A home where two showers, a dishwasher, and a washer run together needs a bigger unit than a two-person household.
- Location. Moving a heater from a garage corner to an exterior wall or an attic changes the plumbing, the vent, and the time on site.
- Local rules. Some towns set their own water heater requirements, and Little Elm’s water heater regulations are one example. We handle the permit steps your city requires.
Common add-ons
- Isolation valves, so the unit can be flushed without disconnecting it
- A recirculation pump or return line, if waiting for hot water at a far bathroom bothers you
- A pressure relief valve, expansion tank, or new shutoff valves where required
- Gas line upsizing, a new gas shutoff, or a sediment trap
- Permit handling for your city
- Haul-away of the old tank
Ongoing costs to plan for
Tankless heaters run on a flush schedule. Mineral scale collects in the heat exchanger and cuts flow and efficiency, and it can set off error codes. That is why we suggest isolation valves at install. A flush is a short visit, and it is the main thing that keeps a tankless unit running as long as it should. If you also have a tank heater elsewhere on the property, our water heater maintenance page covers both.
Questions to ask about any tankless quote
Tankless estimates can look far apart, and the difference is usually in what is included. Before you compare numbers, ask what each one covers:
- Does the price include any gas line upsizing, or only the heater itself?
- Is the venting included, and how long is the run?
- Does it include isolation valves, a condensate drain, and a pressure relief valve?
- Is the permit included, and who pulls it?
- What does the warranty cover, and who supplies the parts?
Our estimate lists each of those, so you can see what you are approving. If another quote leaves one out, you can add it back and compare fairly.
Financing
Financing is available. Ask us when you call and we will send you the details.
Warranty
We back our work with a 5-year warranty on parts and labor when we supply the parts. That covers the unit and the work to install it. Ask for the details when you call.
Want a firm number for your house? Call (469) 552-2881. We are open 24 hours, 7 days a week.